ຜະລິດຕະພັນ

Kevlar Fiber Packing

View as  
 
  • Braided from high quality Aramid fiber with PTFE Impregnation and lubricant additive. Extremely hard wearing. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but may damage the shaft if not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Compared with other kinds of packing, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in. 

  • Braided from high quality spun Aramid fiber with PTFE Impregnation and lubricant additive. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but no harm to the shaft. Compared with other kinds of packing, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in. 

  • Braided ຈາກເສັ້ນໄຍ nomex ທີ່ມີຄຸນນະພາບສູງ 100% ກັບ PTFE-Impregnation and lubricant additive. ຄວາມຫນາແຫນ້ນດ້ານຕັດດ້ານສູງແລະຄວາມເຂັ້ມແຂງທາງດ້ານໂຄງສ້າງ, ລັກສະນະທີ່ເລື່ອນລົງທີ່ດີ, ອ່ອນໂຍນຢູ່ດ້ານຫນ້າ. ເມື່ອທຽບກັບ Kevlar, ມັນບໍ່ເປັນອັນຕະລາຍ, ແຕ່ຍັງເຫມາະສໍາລັບອຸດສາຫະກໍາອາຫານ

  • ການຫຸ້ມຫໍ່ເສັ້ນໄຍ Nomex ດ້ວຍຫຼັກຢາງຢາງຊິລິໂຄນ, ຫຼັກຢາງສູງທີ່ຍືດຫຍຸ່ນສາມາດດູດຊຶມຄວາມສັ່ນສະເທືອນ, ເພື່ອຄວບຄຸມການຮົ່ວໄຫຼ.

  • Braided from high-performance KynolTM (also named novoloidTM or phenolicTM) fiber impregnated with special PTFE lubricant, it has very good mechanical properties combining softness and strength. The packing has natural golden sheen. Compared to ordinary aramid and PTFE 

 1